Cbb20 Polypropylene Safety Capacitor

Cbb20 Polypropylene Safety Capacitor are available with different values of general and value ratings. They are used for DC pulsation, pulse, and AC voltage reduction in instruments, meters, TV sets and household electrical appliances. We are looking for bulk enquiries for Cbb20 Polypropylene Safety Capacitor, MPT Series tubular capacitors etc.

Kategori Polypropylen kondensatorer

Produkt beskrivelse

Trends in Cbb20 Polypropylene Safety Capacitor

Den sædvanlige metode til fremstilling af filmkondensatorer er at bruge en metalfolie såsom aluminium som en elektrode og en plastikfilm til at overlappe og derefter rulle dem sammen. Blandt alle plastfilmkondensatorer har polypropylenkondensatorer de vigtigste egenskaber, og prisen på sådanne kondensatorer er selvfølgelig relativt høj. Men i de seneste år, for at forbedre kvaliteten, er de anvendte dele og materialer blevet mere og mere avancerede, og prisen er ikke den vigtigste faktor at overveje, så i de seneste år har frekvensen og mængden af PP-kondensatorer været blive højere og højere.

Due to the electrical impedance of a capacitor decreasing with frequency, they are an efficient component for reducing interference because at higher frequencies, they short circuit electrical noise and transients between the lines or to ground. As a result, they shield machinery and equipment from electromagnetic and radio frequency interference as well as transients in across-the-line (X capacitors) and line-to-ground (Y capacitors) connections. This includes motors, inverters, electronic ballasts, solid-state relay snubbers, and spark quenchers. Interference that is symmetrical, balanced, or differential can be successfully absorbed by X capacitors. To counteract asymmetrical, unbalanced, or common-mode interference, Y capacitors are linked in a line bypass between the line phase and a point of zero potential.

We know that Cbb20 polypropylene safety capacitor have a great advantage, that is, they have self-healing properties, that is, if there is a problem inside the capacitor, it can achieve self-healing and can be used normally, but film capacitors also have a disadvantage, that is, film capacitors The capacity will be reduced, especially for the resistance-capacitance step-down circuit. If the quality of the film capacitor is not good, the capacity attenuation will be very serious.

Specifications of Cbb20 polypropylene safety capacitor:

Dielectric	Polypropylene film
Electrodes	Vacuum evaporated metal
Coating	Out wrapped with Mylar tape and ends sealed with epoxy resin
Leads	Axial leads of tinned wire
Reference standard	IEC 384-16; GB 10190-1988
Climatic catalogue	40/85/21
Capacitance versus rated voltage (UR)	0.01 µF-12 µF/100VDC 0.01 µF-12µF/250VDC 0.001 µF-3.3µF/400VDC 0.001 µF-2.2 µF/630VDC
Kapacitanstolerance	M = ±20%, K = ±10%, and J = ±5%
Dissipation factor	DF≤0.1% (at 20°C, 1KHz)
Voltage-proof	1.6*UR Unit:VDC (5s at 20°C)
Insulation resistance	C≤0.33µF, IR≥30000MΩ, C>0.33µF, IR*C≥5,000s (1 minute at 20°C and R≤65%)
Endurance	1000 hours with 125% of rated voltage at 85°C. After the test: ΔC/C ≤5%; ΔDF ≤0.40%, IR ≥50% of the specified value (20°C, 1kHz)

Application of Cbb20 polypropylene safety apacitor:

1. Kobling, afkobling, by-pass og timing kredsløb
2.Automatic control system,communication equipment
3.Charging/discharging, lighting, noise suppression and frequency modulation

Polypropylenfilmkondensatorer bruges hovedsageligt i elektronik, husholdningsapparater, kommunikation, elektrisk kraft, elektrificerede jernbaner, hybridkøretøjer, vindkraft, solenergi og andre industrier. Den stabile udvikling af disse industrier har fremmet væksten af filmkondensatormarkedet.